Dane Gregory

Tile and stone floors are attractive and long lasting—as long as they’re cared for properly. Unfortunately, clients often wait too long before calling a cleaning professional to come maintain their floors. Floor care expert Dane Gregory recently shared what cleaning technicians need to know about maintaining tile and stone floors and what they can do to extend the life of this type of flooring for their clients. Q: What are the differences between ceramic tile and stone? Ceramic tile is a manufactured product in which natural minerals have been pressed together with hydraulic pressure in a press machine. Stone is a natural product taken from the ground, where minerals have been pressed together by the heat and pressure of the Earth over long periods of time. Ceramic tiles can be produced to look very much like natural stone. Q: How can you differentiate ceramic tile and stone? Compare the patterns on different tiles to see if they are similar or exactly the same. If the patterns on the different tiles are similar but not identical, the tiles could be made of either stone or ceramic. If the patterns match exactly, the tiles are most likely ceramic or another fabricated material. However, visually identifying these differences can be challenging because ceramic tile and stone can look comparable, especially with polished (shiny) materials. Don’t rely solely on visual identification unless you have a lot of experience with these types of tiles. Another option for identifying the material is a porosity test—most manufactured tile is not porous whereas natural stone sometimes is. Q: What are some typical challenges with cleaning and maintaining ceramic tile and stone? The biggest challenge is that customers often wait too long before calling a professional for cleaning and maintenance, so the soil load is significant. Another challenge is that customers have cleaned their flooring with a household cleaner for years, which has left detergent residue that attracts even more soils. As most professionals are aware, household cleaners are not neutral (that is, they do not have a pH of 7) and therefore need a thorough rinsing after cleaning. The buildup is even more pronounced in the grout, which is not of the same texture as the tiles and releases soils much differently. The grout acts as a valley between the tiles, and soils are drawn to those low-lying areas. Because of the grout’s low position, cleaners need to think about the tools they are using. Tools such as dust mops are flat, but tiled floors are not. Flat tools actually drive dry soils into the grout. Adding water from a spray mop afterward creates mud in the grout joints, making cleaners’ jobs more difficult. Q: Tell us about the types of grout that cleaners encounter. Which are easiest to maintain? What can clients do to make routine maintenance easier? The three types of grout are cement based, epoxy, and furan resin. The first two varieties are usually found in residential and commercial buildings. Furan resin grout is mostly found in commercial and health care environments such as meat-packing facilities and hospital operating rooms. Cement-based grout is most popular and is used in a variety of residential and commercial installations. The problems with cement-based grout are the amount of soils that adhere to its surface and its porosity, which allows liquids to penetrate below its surface, causing stains. Cement-based grout should be sealed to prevent liquids from penetrating it. Epoxy grout is a substance resembling plastic that doesn’t retain soils and cannot be penetrated by liquids or dirt in any way. This grout is the easiest to maintain, but because installation requires that a catalyst or hardener be used in the mixing process, it is difficult for the tile setter to install. Clients can make routine services easier by substituting a broom for a dust mop. They should regularly use a broom to get into the low-lying area of the grout, removing dry soils before they get wet and become difficult to remove. Clients can also use a proper neutral cleaner during regular cleaning to keep detergent residue from attracting additional soils. Q: Why does grout get so dirty compared to the rest of the floor? Grout sits below the surface of the tiles; water finds the lowest point and brings any soils with it. Those soils are then added to the cooking and body oils that most homes have within the air, which settle onto the flooring. Most soils are held into the grout by detergent residue when household cleaners are not rinsed properly. In fact, the same soils are found in both carpet and grout—carpet just hides the soils better than grout does. Q: Can you list and describe the types of planned maintenance programs cleaners should use? Initial maintenance is the first process. A common problem with new installations, for example, is grout haze. This occurs when the installation crew uses only water to remove the cement debris that has spread over the flooring while the grout is “floated” into the gap between the tiles. Once dried, this haze forms a thin layer of concrete on top of the tiles. Acidic products work well to remove this type of residue, but cleaners should be careful not to get acid into the grout joint itself. Routine maintenance is the process most homeowners, cleaning services, and building service contractors perform frequently to remove daily or weekly soil buildup. The key here is to clean effectively with neutral cleaning products to limit any detergent residue. Interim maintenance is done when routine services are no longer effective or practical. An example includes using a narrow grout brush with a neutral cleaner to service the low areas of the grout joints. This is done more frequently than restoration maintenance but less frequently than routine maintenance. Restoration maintenance is needed when the soils on the flooring get out of hand and when either routine or interim maintenance can no longer remove them. Implementing lower production rates, combined with strong detergents and large

Follow CMM

Dane Gregory

Articles by Dane Gregory

Q&A: Tile and Stone Floor Maintenance

Hard Floors

The Evolution Of Hard Floor Care

Hard Floors

Four Maintenance Stages

Facility Management

View the Latest CMM Magazine Edition